RecipesLearn

Basic, “Original” Beef Jerky Recipe

This is a really basic beef jerky - it's mainly savory with a hint of sweetness. It's easy to customize and experiment with 1 off ingredients too.
dylan clay profile picture
By Dylan Clay
November 20, 2024
original beef jerky recipe

Meat to Use

This recipe uses 1 lb of london broil.

If you can’t find London broil, use:

  • Round tip
  • Brisket Flat
  • Bottom Round
  • etc.

Slicing the Meat

Dylan’s Tip: If the meat is thawed, put it into the freezer for 30 minutes to 1 hour; This makes slicing easier.

  • For soft jerky – slice against the grain.
  • For jerky with a “tug” – slice with the grain.

Slice the meat roughly 1/8″ – 1/4″ thick.

jerky grain direction examples

“Original” Beef Jerky Marinade

In a mixing bowl combine:

  • 1/3 Cup Low Sodium Soy Sauce
  • 1/4 Cup Water
  • 2 tbsp Worcestershire Sauce
  • 1/4 cup Brown Sugar
  • 1/4 Tsp Citric Acid
  • 1 tbsp vinegar
  • 2 tsp granulated garlic
  • 1/2 tsp granulated onion
  • 1 tsp ground black pepper

Marinate for at least 6 hours, ideally overnight.

Heat Treating the Beef Jerky to Make it Even MORE Soft

If you don’t care about this step, skip it – just dehydrate at 160F until the jerky is done.

I like my jerky soft – one of the better ways to achieve this is by dehydrating at a lower temperature (around 120-130F).

Pre-heat your oven to 350F.

Line a baking sheet with aluminum foil and then place metal cooling racks on top:

cooling racks on baking sheet

Place marinated beef jerky on top of the cooling racks ensuring none overlaps.

Once at 350F, put your baking sheet in the oven on the middle rack for 10 minutes.

While your meat is heat treating, set your dehydrator to 120-130F.

Dehydrating the Beef Jerky

After 10 minutes, transfer meat to your dehydrator.

Allow the jerky to dehydrate for at least 3 hours.

After 3 Hours, Start Checking for Doneness

Most beef jerky will be done in 3-5 hours.

After 3 hours, take a small piece out and allow to cool for 5-10 minutes.

Once cooled, bend it.

The jerky should have a noticeable spider webbing at the bend.

jerky bend test for spider webbing

If the piece still feels like rubber bands and the bend has hues of red and pink – it’s not done.

Keep checking a new piece every 30 minutes.

Store the Jerky in a Cool, Dry, Dark Place

As the jerky starts to finish, transfer to a ziplock bag to cool.

Leave the top open and allow it to aerate.

Then zip the top and store.

Simple, “Original” Beef Jerky

A basic marinade that's mainly savory and slightly sweet
Prep Time15 minutes
Active Time4 hours
Marination Time16 hours

Ingredients

  • 1 lb London broil

"Original" Jerky Marinade

  • 1/3 Cup Low Sodium Soy Sauce
  • 1/4 Cup Water
  • 2 tbsp Worcestershire Sauce
  • 1/4 Cup Brown Sugar
  • 1/4 Tsp Citric Acid or 1 tbsp lemon juice
  • 1 tbsp vinegar
  • 2 tsp granulated garlic
  • 1/2 tsp granulated onion
  • 1 tsp ground black pepper

Instructions

Slicing and Marinating

  • Take 1 lb of lean beef and cut against the grain.
    Slice the strips to 1/8-1/4" thick.
  • In a bowl combine the marinade ingredients in the specified quantities. Ensure the powders and sugars are well combined.
    1/3 Cup Low Sodium Soy Sauce, 1/4 Cup Water, 2 tbsp Worcestershire Sauce, 1/4 Cup Brown Sugar, 1/4 Tsp Citric Acid, 1 tbsp vinegar, 2 tsp granulated garlic, 1/2 tsp granulated onion, 1 tsp ground black pepper
  • Add your marinade and sliced jerky to a ziplock bag. Massage the marinade into the beef.
  • Put in your refrigerator to marinate for 2 hours; Ideally, you'd marinate overnight for 16+ hours

Optional: Heat Treating the Jerky so You Can Dehydrate at a Lower Temperature

  • Line a baking sheet with aluminum foil. Then place oven-safe cooling racks on top. Put your marinated beef jerky on top of the cooling racks, ensure that pieces aren't touching or overlapping.
  • Pre-heat your oven to 350F.
  • Once pre-heated put your jerky in the oven on the middle rack for 10 minutes.
  • While your jerky is heat treating, set your dehydrator to 120-130F.

Dehydrating the Beef Jerky

  • After 10 minutes place your beef jerky in your dehydrator. Ensure pieces aren't touching or overlapping.
  • Allow the jerky to dehydrate for 3 hours and then start checking for doneness.

Testing Beef Jerky for Doneness

  • After 3 hours take a few pieces of beef jerky out of the dehydrator and allow them to cool for 5-10 minutes.
  • Once cooled, bend the jerky.
  • If at the bend you notice a "spider webbing" – it's done. If at the bend you notice the jerky is rubbery and has hues of red/pink, it's not done.

Storing the Jerky

  • Once done, put in a ziplock bag with the top open and allow the jerky to aerate for 30 minutes.
    Once aerated, zip the top and store in a cool, dry, dark place.

Notes

I pre-heat my jerky because I like to dehydrate at a lower air temperature – it makes the jerky softer. 
If you don’t want to do this, just dehydrate at 160F the entire time. 

Recipe Rating




Want Similar Recipes in Your Inbox?

No spam, just recipes you and your family will like.

  • Smoked, Grilled, and Dehydrated Meats
  • Food trends explained
  • Meal recommendations
  • Q&A from expert home cooks